Specifications

<WINKER BULB>
Front Winker Bulb
(1) Loosen tapping screw to disassemble a
winker lens.
(2) Press a bulb with a light force and rotate
it to counterclockwise to disassemble it.
(3) Replace it with new bulb. Apply reverse
order of disassembly for assembly.
FRONT WINKER BULB: 12V 10W
Rear Winker Bulb
(1) Loosen two tapping screws to
disassemble a tail light lens and a winker
lens.
(2) Press a bulb with a light force and rotate
it to counterclockwise to disassemble it.
(3) Replace it with new bulb. Apply reverse
order of disassembly for assembly.
REAR WINKER BULB: 12V 10W
Check the objects at the back are well
noticed when seating on a driver’s seat, and
also mirror for damage or contamination.
Check there is no gasoline leakage from fuel
tank, hoses, carburetor, etc.
(1) Park the vehicle on a flat surface by
use of main stand.
(2) Check the cooling water level in
reservoir through right air duct on
inner box.
(3) If the level is lower than specified
value, refill the reservoir.
30
REAR VIEW MIRROR
CHECKING COOLING WATER
FUEL LEAK INSPECTION
BULB
BULB
WINKER LENS
WINKER LENS
RESERVE TANK
CAUTION
●If the cooling water level is lower
than specified value, check the
leakage from engine, radiator, hoses,
etc.