OWNER'S MANUAL HEAD OFFICE (FACTORY) #58, SUNG SAN-DONG, CHANG WON, KYUNGNAM, KOREA TEL : (82-55) 239-7000 FAX : (82-55) 239-7524 OM42-0201-02E
*NS-125DLXO/M02.11.53:40PM페이지1 CONTENTS SPECIFICATION ................................................................... 3 OPERATION INSTRUCTION ............................................ 4 SAFETY PRECAUTIONS ................................................... 4 PRIOR TO STARTING VEHICLE .......................................... 5 CORRECT ATTIRE ............................................................ 5 OPERATION...................................................................... 6 CARGO.........
*NS-125DLXO/M02.11.53:40PM페이지2 FUEL LEAK INSPECTION ................................................ LICENSE PLATE INSPECTION......................................... MAINTENANCE ............................................................... MAINTENANCE SCHEDULE ............................................ MAINTENANCE PRECAUTIONS ...................................... BRAKES ........................................................................ BRAKE HOSE, PIPE LEAKAGE, DAMAGE, ASSEMBLY STATE ....
*NS-125DLXO/M02.11.53:40PM페이지3 SPECIFICATION ITEM DATA ITEM DATA LENGTH×WIDTH×HEIGHT(mm) 1,970×700×1,110 IGNITION SYSTEM C.D.I WHEEL BASE(mm) 1,350 BATTERY CAPACITY 12V6AH(MF TYPE) GROUND CLEARANCE(mm) 130 FUEL CAPACITY(ℓ) 7.5 SEAT HEIGHT(mm) 765 WEIGHT(kgf) 110 PASSENGER 2 ENGINE TYPE OIL COOLED/AIR COOLED 4 STROKE 4VALVE TIRE SIZE SUSPENSION BRAKE FR. 120 / 70 - 12 53K RR. 130 / 70 - 12 62K FR. TELESCOPIC RR. UNIT SWING OIL DAMPER FR. HYDRAULIC DISK RR.
*NS-125DLXO/M02.11.53:40PM페이지4 OPERATION INSTRUCTION SAFETY PRECAUTIONS This manual describes matters pertaining to correct operation, safe operation and simple maintenance of the vehicle you purchased. To ensure more comfortable and safer operation, make sure to read this manual carefully prior to operation. ●The photographs and drawings shown in this manual may differ from those of actual vehicles due to changes in vehicle specifications and modifications made.
*NS-125DLXO/M02.11.53:40PM페이지5 PRIOR TO STARTING VEHICLE ●Read user's manual carefully. ●Conduct maintenance checks prior to operation. ●Always maintain vehicle in clean status and carry out specified maintenance checks. ●Make sure to stop engine and stay away from fire when fueling. ●Exhaust gas contains harmful substance such as carbon monoxide, Start engine in well-ventilated places. A helmet should always be worn and the helmet chin strap should be securely fastened.
*NS-125DLXO/M02.11.53:40PM페이지6 OPERATION ●Operators should naturally fix bodies to keep smooth driving. ●Please check whether or not you are unnaturally strained and strung up. ●Driving pose has a great influence on safe operation. Please always maintain the center of your body in the middle of seat, Especially do not sit at the rear seat because it may lessen the weight of front wheel and cause trembling steering wheel.
*NS-125DLXO/M02.11.53:40PM페이지7 MODIFICATION CAUTION ●Only load cargo in or on designated areas as placing or fastening cargo to other areas can cause damage to the vehicle. ●Do not place articles between the frame body cover and engine as this can burn the goods. Modification of vehicle structure or function deteriorates manipulability or causes exhaust noise to become louder shortening the vehicle life. These modifications are not only prohibited by law but also are the acts harmful to other people.
*NS-125DLXO/M02.11.53:40PM페이지8 PARTS LOCATION MAIN SWITCH FUEL TANK FR.
*NS-125DLXO/M02.11.53:40PM페이지9 RR.
*NS-125DLXO/M02.11.53:41PM페이지10 METER READING AND USAGE ODOMETER WINKER INDICATOR METER INDICATOR LAMP Indicates driving speed. Maintain legal speed limits to ensure safe operation. If the winker switch is operated, the winker indicator flashes in union with the flashing of the turn signals. FUEL GAUGE Indicates total distance in kilometers travelled by the vehicle. CLOCK SPEEDOMETER 10 HEADLIGHT INDICATOR ●Current time shows below meter.
*NS-125DLXO/M02.11.53:41PM페이지11 HOW TO SET CLOCK TIME EX) 12 : 30 DATE EX) A B 1 21 DATE/TIME CHECKING A B EXAMPLE 1 If you push button A one time, time will be changed into date. 12 : 30 TIME SETTING ●Push button B 4 times. 12 : P ●Push button A and set time you want. ●If completed, push button B for setting. MINUTE SETTING : 30 ●Push button B 5 times. ●Push button A and set time you want ●If completed, push button B for setting. MONTH SETTING 1 ●Push button B 2 times.
*NS-125DLXO/M02.11.53:41PM페이지12 SWITCH OPERATION MAIN SWITCH MAIN SWITCH KEY 1. On.... Starts engine. Key can not be pulled out. 2. OFF....Stops engine. Key can be placed in or taken out of the main switch. 3. LOCK....Locks handle bars. Key can be placed in or taken out of the main switch. 12 CAUTION ●Do not manipulate main switch key during operation. If the main switch key is placed on“Off” or“Lock” position, all electrical system will not function.
*NS-125DLXO/M02.11.53:41PM페이지13 HEADLIGHT WINKER SWITCH Put main switch key in “ON” position and turn on headlight switch. High beam or low beam can be operated by the use of high/low beam switch. HEADLIGHT HIGH/LOW BEAM SWITCH HEADLIGHT SWITCH WINKER SWITCH HIGH BEAM D (HI) SWITCH POSITION (H) (P) (OFF) FUNCTION Headlight, taillight, position lamp and meter lights on. Position lamp, taillight, and meter lights on. Light turned off. .....
*NS-125DLXO/M02.11.53:41PM페이지14 HORN BUTTON HAZARD SWITCH EQUIPMENT USAGE STEERING LOCK STEERING LOCK HORN BUTTON The horn is sounded if the horn button is pressed when the main switch is in an ON position. KEY HAZARD SWITCH When the emergency light button is pressed with the main switch in “ON” position, the winker lamp will start blinking. To lock the steering, turn the handlebars all the way to the left, turn the key to LOCK while pushing in. Remove the key.
*NS-125DLXO/M02.11.53:41PM페이지15 INNER BOX SEAT LOCK SEAT LOCK INNER BOX CAUTION ●Do not place valuable of fragile goods in the inner box. ●Make sure to remove important items out of the inner box when washing the vehicle as water can enter the inner box. MAIN SWITCH MAIN SWITCH ●The seat automatically locks when the seat is pushed in its downward position, ●Lightly pull upward on the seat to make sure the seat has been properly locked.
*NS-125DLXO/M02.11.53:41PM페이지16 TRUNK DOCUMENT STORAGE AREA TRUNK SEAT LOCK ●There is a trunk under the seat. ●The seat is opened to gain access to the trunk by using the main switch key on the seat lock. ●The lamp inside the trunk will be turned on if the seat is opened. TRUNK MAXIMUM LOAD:10kg 16 CAUTION ●Make sure that the seat is securely locked after closing the seat. ●An unlocked seat can hinder the operation of the vehicle. ●The temperature inside the trunk rises due to heat from the engine.
*NS-125DLXO/M02.11.53:41PM페이지17 BAG HOLDER HANDPHONE CHARGER HANDPHONE CHARGER BAG HOLDER ●For ease in carrying bags and similar items, they should be hung from the bag holder which is fitted for this purpose. ●When using the bag holder, place it in the open position and return it to the normal position when not in use. CAUTION ●Do not attempt to carry very heavy or bulky loads since this would affect the stability and steering characteristics of the scooter.
*NS-125DLXO/M02.11.53:41PM페이지18 CORRECT DRIVING OPERATION ●Make sure to check the oil, gasoline, etc., before starting the engine. ●Please ensure that the main stand is in a down position when starting the engine. CAUTION ●Make sure that the rear brake is holded when starting the engine to prevent an unexpected quick start of the vehicle. ●Drive with care for both safety reasons and longer vehicle life.
*NS-125DLXO/M02.11.53:41PM페이지19 ●Press the starter button without rotating the starter grip (opening the throttle). ●If the engine is hot and does not start after pressing the starter button for 3~4 seconds, rotate the throttle grip to 1/8~1/4 of a rotation and try again.
*NS-125DLXO/M02.11.53:41PM페이지20 ●Erect main stand and hold rear brake lever and then step kick starter pedal strongly. IF ENGINE CANNOT BE STARTED When the engine is cold (morning or winter or the vehicle has not been used for a long period of time) let the engine idle for a short period allow the engine to warm up. CAUTION ●Keep holding rear brake until start. ●Exhaust has contains harmful substance such as carbon monoxide. Start engine in well-ventilated places.
*NS-125DLXO/M02.11.53:41PM페이지21 AFTER STARTING ENGINE Fold the main stand. ●Push the vehicle forward to fold the main stand and make sure that the brake lever does not become released during this operation. Get on the vehicle. ●Mounting should be done from the left side, and you should sit squarely on the seat. Leave either one foot or both feet planted on the ground. Release the squeezing tension on the rear brake lever and slowly begin to rotate the throttle grip to allow for a slow and easy start.
*NS-125DLXO/M02.11.53:41PM페이지22 PROPER DRIVING METHODS ●Before entering traffic, use the correct turn signal to foreward other drivers of your intentions. Speed is controlled by the operation of the throttle grip. ●If the throttle grip is rotated........ The speed of the vehicle increases. Please rotate the throttle grip slowly. When climbing a hill, the throttle grip need to be rotated further to give the vehicle more power. ●If the throttle grip is allowed to rotate back........
*NS-125DLXO/M02.11.53:41PM페이지23 The brakes should never be suddenly applied and the handle bars should never be suddenly turned. ●Sudden braking or turning can cause the vehicle to slide and tip over. ●It is especially dangerous to perform sudden braking on wet roads or in rainy weather as the tires can lose traction and slip easily. Special care in driving should be taken during rainy weather. ●More braking distance is needed when driving on wet roads or in the rain.
*NS-125DLXO/M02.11.53:41PM페이지24 After the vehicle has come to a complete stop. Dismount on the left side and lower the main stand on a flat surface. ●Return the turn signal switch to the center position and turn the main switch to OFF. This will turn the engine off. ●Be sure to park in an area that is free of traffic. Also, the vehicle can tip over if the main stand is not placed on a stable and flat surface.
*NS-125DLXO/M02.11.53:41PM페이지25 SELF INSPECTIONS BEFORE OPERATION Self inspect the vehicle and have regular maintenance inspections for increased safety and the prevention of accidents. Regular maintenance inspections should be performed even if the vehicle has not been used for a long period of time. Self inspections before operation should be performed on a daily basis prior to operating the vehicle.
*NS-125DLXO/M02.11.53:41PM페이지26 INSPECTION OF CONCERNED AREA ● Check areas which caused for concern when last operating the vehicle. ● If happened, contact authorized maintenance shops for necessary inspection and repairs. BRAKE INSPECTION Lightly squeeze the brake levers until tension is felt to check for an appropriate amount of free play. No free play in the brake levers or overly loose brake levers are indication of a problem in the brake system.
*NS-125DLXO/M02.11.53:41PM페이지27 FUEL CHECK ●Check gasoline to see if there is a sufficient amount of gasoline to reach your destination. ●If the fuel gauge needle indicates E mark (red portion), fill fuel tank with gasoline as soon as possible. ●Use the main switch key to open the SEAT. ●Turn the fuel tank cap counterclockwise, and remove it. ●Fill the tank with gasoline until it reaches the bottom of the level plate. ●Be sure to set the fuel tank cap to the right position.
*NS-125DLXO/M02.11.53:41PM페이지28 TIRE INSPECTION Check for an appropriate level of air pressure by examining how the tire sits on the ground. If you notice any abnormalities in the shape of the tire with regard to the area contacting the ground, use a tire gauge to check tire pressure and adjust the tire pressure to the appropriate level. Check tire tread and sides for cracks and damage. Check tire tread and sides for nails, rocks, etc.
*NS-125DLXO/M02.11.53:41PM페이지29 ENGINE OIL LEVEL CHECK CAUTION ●If air pressure is inadequate or if there are cracks, damage or abnormal wear on tires, it may cause trembling steering wheel and flat tire. ●Insufficient air pressure may cause the heavy steering wheel making handling difficult, fuel over consumption and the excessive wear of tire outer area and excessive air pressure may cause easier wheel handling and lower fuel consumption. But it may also cause the excessive wear of tire center area.
*NS-125DLXO/M02.11.53:41PM페이지30 BACK MIRROR INSPECTION Sit squarely on the seat and check to see if you have a good view behind the vehicle by looking at the back mirrors. Also check for dirt and damage on the back mirrors. FUEL LEAK INSPECTION Check to see if there is any leaking fuel by thoroughly checking the fuel tank, hose, carburetor, etc. CAUTION ●If any fuel is spilled, make sure the area is dry before starting the engine.
*NS-125DLXO/M02.11.53:41PM페이지31 MAINTENANCE SCHEDULE Perform the Self Inspections Before Operation at each scheduled maintenance period.
*NS-125DLXO/M02.11.
*NS-125DLXO/M02.11.53:41PM페이지33 MAINTENANCE PRECAUTIONS The following is an explanation of correct inspection methods, cleaning and parts replacing. Please always refer to this section when wanting to inspect or repair your vehicle. WARNING ●If your motorcycle is overturned or involved in a collision, inspect control levers, cables, brake hoses, calipers, accessories, and other vital parts for damage. Do not ride the motorcycle if damage impairs safe operation.
*NS-125DLXO/M02.11.53:41PM페이지34 ●Check that the fluid level is above the LOWER level mark with the motorcycle in an upright position. ●Brake fluid must be added to the reservoir whenever the fluid level begins to reach the LOWER level mark. 1.Remove the screw rivet and take the front brake fluid maintenance lid off. 2.Clean dust and other foreign materials around reserve tank to prevent foreign materials from falling inside tank. 3.
*NS-125DLXO/M02.11.53:41PM페이지35 BRAKE HOSE, PIPE LEAKAGE, DAMAGE, ASSEMBLY STATE Visually check for fluid leaks or damage and, using a spanner, check joints and clamps for clearance. Also, check hose and pipe protective parts to see if they contact other parts when turning the handle bars or due to vibration when driving. BRAKE PAD WEAR Brake pad wear depends upon the severity of usage, the type of riding, and road conditions. (Generally, the pads will wear faster on wet and dirty roads.
*NS-125DLXO/M02.11.53:41PM페이지36 CHANGING ENGINE OIL If engine oil is polluted, it seriously affects the engine life span. Maintain appropriate level of oil, use correct type of oil and observe oil exchange period. ●Stand vehicle on the main stand on level ground and run engine idle(warm-up) for approximately 2-3 minutes. ●Stop engine and place a container under the engine. Remove the drain plug bolt, and drain engine oil. ●Tighten the drain plug bolt.
*NS-125DLXO/M02.11.53:41PM페이지37 WHEEL REMOVAL [FRONT WHEEL REMOVAL] ① Raise the front wheel off the ground by placing a support block under the engine. ② Loosen the oval screw and remove the speedometer cable. ④ Loosen the axle nut. ⑤ Withdraw the front wheel axle and remove the front wheel. DEPRESSED PART FIXING BOLTS AXLE NUT FRONT CALIPER OVAL SCREW SPEEDOMETER CABLE ③ Remove the front caliper assembly from the front fork by removing the fixing bolts.
*NS-125DLXO/M02.11.53:41PM페이지38 FIXING BOLTS CAUTION ●If a torque wrench was not used for installation, see your authorized dealer as soon as possible to verify proper assembly. Improper assembly may lead to loss of braking capacity. ① Set vehicle on main stand in upright position on level ground. ② Loosen the rear brake hose setting bolt. ③ Loosen the 3muffler setting bolts, and remove the muffler.
*NS-125DLXO/M02.11.53:41PM페이지39 SPARK PLUG If electrode is stained or clearance is not right, satisfactory spark is not produced. Clean and make adjustment. ●Remove spark plug cap. ●Clean around the plug. ●Using a plug wrench, remove plug. ●Clean plug with plug cleaner. ●Check electrode for wear and corrosion. ●Measure clearance using a feeler gauge. PLUG GAP: 0.8-0.9mm ●Tighten with hands until the plug washer touches cylinder head.
*NS-125DLXO/M02.11.53:41PM페이지40 BATTERY INSPECTION ●If you remove two screws from battery box cover after putting floor panel met forward, you will find battery assembled. ●If the battery terminal is polluted, or in rust, separate battery and clean it. ●Battery terminal in rust with white powder should be cleaned with warm water. ●In case of serious rust of battery terminal, disassemble the battery cord and grind it with wirebrush or sandpaper.
*NS-125DLXO/M02.11.53:41PM페이지41 FUSE REPLACEMENT Turn off the main switch to see if the fuse is severed. If the fuse is severed, exchange the fuse into 7A fuse. BATTERY COVER ●To change a fuse, first take off battery cover. Then, disconnect a “fuse connector” after opening a “fuse holder.” ●If the fuse immediately becomes severed after being changed with the new one, check another problem of the electric system. CORD FUSE CONNECTOR CAUTION ●Disassembly.
*NS-125DLXO/M02.11.53:41PM페이지42 BULB REPLACEMENT ●Be sure to turn the ignition switch OFF when replacing the bulb. ●Do not use bulbs other than that specified. ●After installing a new bulb, check that the light operates properly. CAUTION ●The light bulb becomes very hot while the light is ON, and remain hot for a while after it is turned OFF. Be sure to let it cool down before servicing. ●Do not put finger prints on the headlight bulb, as they may create hot spots on the bulb and cause it to break.
*NS-125DLXO/M02.11.53:41PM페이지43 [TAIL/STOPLIGHT BULB] [WINKER BULB] ① Remove the rear undercover. ② Loosen the 2 screws and remove the rear combination light lens. ③ Slightly press down on the bulb and turn it counterclockwise. ④ Install a new bulb in the reverse order of removal. TAIL/STOP LIGHT BULB : 12V 21W/5W REAR COMBINATION LIGHT LENS ① Remove the RH./LH. back mirrior. ② Loosen the 1 RH./LH. handle side cover lower screw, and 1 each of the special upper side screws.
*NS-125DLXO/M02.11.53:41PM페이지44 AIR CLEANER ELEMENT INSPECTION ① Remove the rear undercover. ② Loosen the 2 screws and remove the rear combination light lens. ③ Remove the rear winker lens. ④ Slightly press down on the bulb and turn it counterclockwise. ⑤ Install a new bulb in the reverse order of removal. REAR WINKER BULB : 12V 10W REAR COMBINATION LIGHT LENS REAR WINKER LENS ① Turn the seat lock switch to the right using the main switch key.
*NS-125DLXO/M02.11.53:41PM페이지45 SIDE STAND INSPECTION ●Erect main stand and place vehicle in upright position on level ground. ●Check the spring for damage or loss of tension and the side stand assembly for freedom of movement. ●Check the side stand ignition cut-off system; Put the side stand up. Start the engine. Lower the side stand. The engine should stop as you put the side stand down. CABLE RUBBER PART INSPECTION A rubber part is assembled on the cable to protect the inner cable.
*NS-125DLXO/M02.11.53:41PM페이지46 STORAGE GUIDE Extended storage, such as for winter, requires that you take certain steps to reduce the effects of deterioration from non-use of the motorcycle. In addition, necessary repairs should be made BEFORE storing the motorcycle; otherwise, these repairs may be forgotten by the time the motorcycle is removed from storage. ●Empty the fuel tank into an approved gasoline container using a commercially available hand siphon or an equivalent method.
*NS-125DLXO/M02.11.53:41PM페이지47 FRAME AND ENGINE NUMBER ●The frame number is stamped on the front central part of the frame. ●The engine number is stamped on the central part of the left crankcase. ●The frame and engine numbers will be used as the basis of recovering the vehicle when is stolen. ●Record the frame and engine numbers along with the vehicle license plate numbers and keep them separately from the vehicle.
*NS125DLX(48~64)02.11.53:47PM페이지48 PREPARATION BEFORE DRIVING SAFE DRIVING ● Performing daily inspection ● Putting on the protective gears (Helmet, glove, goggles, etc.
*NS125DLX(48~64)02.11.53:47PM페이지49 DRIVING METHOD DRIVING POSITION < SCOOTER > The appropriate driving position is most important thing to driving safely. ① Eyes : Look at the front direction widely. ② Shoulders : Relieve the tension. ③ Arms : Relieve the tension and bend arms to inside and let them act as the spring. ④ Hands : Grip the handle the position away from the inside end of the handle with distance of one finger to facilitate the operation of the switch and lever.
*NS125DLX(48~64)02.11.53:47PM페이지50 < VEHICLE EXCEPT SCOOTER > ① Eyes : Look at the front direction widely. ② Shoulders : Relieve the tension. ③ Arms : Relieve the tension and bend arms to inside and let them act as the spring. ④ Hands : Grip the handle the position away from the inside end of the handle with distance of one finger to facilitate the operation of the switch and lever. ⑤ Wrist : Keep the state to act freely without applying excessive force to the shoulder and arms.
*NS125DLX(48~64)02.11.53:47PM페이지51 PRECAUTION WHEN DRIVING ● ● ● ● ● ● ● ● Secure the safe distance. Drive protectively. Do not obstruct the traffic. Do not drive on the pedestrian way or walkway. Drive on the left driveway when passing away. Make sure that you can apply the brake anytime. Always apply the brake when stopping temporarily. Do not drive excessively long distance and take enough break. ● If any abnormality is found, stop driving and contact service center to inspect the vehicle.
*NS125DLX(48~64)02.11.53:47PM페이지52 STARTING Prior to starting always look around to avoid accident. < SCOOTER > ① ② ③ ④ ⑤ Lock the rear brake with the main stand erected. Start the engine using the cell or kick. Pull back the main stand. Get on the vehicle. Release the brake lock lever by pull the rear brake lever strongly. ⑥ Start driving slowly after turning on the winker and releasing the brake while ensuring the safety around the vehicle.
*NS125DLX(48~64)02.11.53:48PM페이지53 < VEHICLE EXCEPT SCOOTER > ① Get on the vehicle after pulling back the stand. ② Start driving slowly after turning on the winker and releasing the brake while ensuring the safety around the vehicle. CAUTION ●Return the side stand to its original position. ●Keep driving without doing this may cause turnover accident.
*NS125DLX(48~64)02.11.53:48PM페이지54 TURNING METHOD PRINCIPLE OF TURN EFFECT OF SPEED CENTRIFUGAL FORCE GRAVITY The basic principle of turn is balancing using the centrifugal force which makes vehicle go outside and the gravity which makes vehicle fall inside. 54 The centrifugal force increases in inverse portion to the radius of a curve and in portion to the square speed. Decelerate prior to entering the curved way to reduce the centrifugal force.
*NS125DLX(48~64)02.11.53:48PM페이지55 3 POSITIONS OF TURNING The basic principle of turn is balancing using combined force of the centrifugal force and the gravity. All 3 positions require straightening the head and keeping the eyes horizontally. < LEAN-WITH > This is a turning position with motor cycle and driver in a line. This position is the most natural and exact, so driver must learn it thoroughly. < LEAN-IN > This is a turning position with driver leaned inside more than motor cycle.
*NS125DLX(48~64)02.11.53:48PM페이지56 TURNING METHOD < LEAN-OUT > This is a turning position with motor cycle leaned inside more than driver, which is opposite to the lean-in position. With this position, quick turn is well performed and driver can obtain wide front visual field adequate to drive on the rained or slippy road because it has best road holding. However, special attention is required because there is danger of slipping on the bad holding road.
*NS125DLX(48~64)02.11.53:48PM페이지57 PRECAUTION WHEN TURNING Do not drive inside of large truck's turn circle.
*NS125DLX(48~64)02.11.53:48PM페이지58 BRAKING METHOD BASIC PRINCIPLE OF BRAKE (FRICTION FORCE) RESTRAINT OF BRAKE EFFECT (INERTIA) ● Vehicle is braked using friction between road surface and tires. ● Braking distance increases 1.5 times on wet road and 3 times on icy road because friction force of road surface is decreased. Due to the inertia, vehicle does not stop immediately after applying the brake.
*NS125DLX(48~64)02.11.53:48PM페이지59 BRAKING METHOD ● Turn the throttle grip to its original position and decelerate IMPACT WHEN COLLISION Learn the proper braking method to prevent accident. using the engine brake. ● Erect the vehicle straight. ● Brake using both front and rear brakes. COMPARISION OF BRAKING DISTANCE ·Vehicle speed : 50 km/h Impact increases in proportion to the speed and weight. The impact when collision to concrete wall at 50 km/h is same as one when falling from the height of 10m.
*NS125DLX(48~64)02.11.53:48PM페이지60 WIRING DIAGRAM START SW. LIGHTING SW. CDI UNIT COMBINATION SW. RR.STOP SW. RE HL TL BAT P Br /W BR B E ST G Y/ R CHARGE SOCKET B B G/Y FUEL UNIT IGN. COIL HORN E HO BAT IG FR.STOP SW. G B/ Y G R B/ W B SIDE STAND S/W G/Y G/Y L / Y/ G W W G/Y B B G/Y G/Y B B G B L/ G G B/ W G G G SB ENGINE 3P MINI BAT.
*NS125DLX(48~64)02.11.
*NS125DLX(48~64)02.11.
*NS125DLX(48~64)02.11.
*NS125DLX(48~64)02.11.
*NS-125DLXO/M02.11.53:42PM페이지48 OWNER’S MANUAL 2002. 1. PRINTED 2001. 1.
