Owner`s manual
●Be sure to turn the ignition switch OFF
when replacing the bulb.
●Do not use bulbs other than that
specified.
●After installing a new bulb, check that
the light operates properly.
[HEADLIGHT BULB]
●Before replacing the bulb, be sure to
check the switches for loose connection
of the connector.
1. Remove the back mirrors.
2. Loosen the 4 screws and remove the
front handle cover.
3. Slightly press down on the bulb holder
and turn it counterclockwise.
4. Slightly press down on the socket and
turn it counterclockwise.
5. Install a new bulb in the reverse order
of removal.
HEADLIGHT BULB : 12V 35/35W
43
BULB REPLACEMENT
WARNING
●The light bulb becomes very hot while
the light is ON, and remain hot for a
while after it is turned OFF. Be sure to
let it cool down before servicing.
CAUTION
●Do not put finger prints on the
headlight bulb, as they may create
hot spots on the bulb and cause it to
break. Wear clean gloves while
replacing the bulb.
If you touch the bulb with your bare
hands, clean it with a cloth moistened
with alcohol to prevent its early
failure.
FRONTHANDLECOVER
SCREWS
HEADLIGHTSOCKETHEADLIGHTBULB