Owner`s manual

14
If you press this button, starter motor runs
and engine is started.
<TURNING ON HEADLIGHT>
(EUROPE ONLY)
Put main switch key in "ON" position and
manipulate headlight switch.
< HEADLIGHT HIGH OR LOW BEAM OPERATION >
High beam or low beam can be operated
by the use of high/low beam switch.
HIGH BEAM
...... used when needing extra
light.
LOW BEAM
...... used when other vehicles
are present, in the city, etc.
HEADLIGHT
CAUTION
●When you travel after sunset, put
headlight in low-beam. This lets
approaching vehicles know of your
position and is helpful to safe
driving.
CAUTION
●Use the high beam only in the
suburban road or when the usage of
the high beam not hinder the safe
driving of the car ahead.
Switch position
(P)
(H)
(OFF)
Function
Position lamp
taillight turned on
Headlight, position lamp
and taillight turned on
Light turned off
HEADLIGHTSWITCH
(LO)
D
(HI)
D
STARTER BUTTON
CAUTION
●Do not press starter button repeatedly
because it consumes great amount of
power causing battery to be
exhausted sooner.
STARTERBUTTON
HEADLIGHTHIGH/LOW
BEAMSWITCH