User's Manual

User’s Manual: ABC-2 Series (SL)
Revision 1.2 (August 23, 2005
)
Elisync Technologies LLC.
-17-
6.3 Massage Mode
z WAVE Button
9 Press the WAVE button to activate the ‘Wave Program
1’ with 30 minutes timer.
9 Press the WAVE button 2
nd
time to activate the ‘Wave
Program 2’.
9 Press the WAVE button to toggle between Program 1
and Program 2 repeatedly.
9 Press the WAVE button for 2 seconds to stop both
massage motors. At the end of 30 minutes, both
massage motors are automatically turned off.
z Back Massage Buttons
9 Press the UP or DOWN button to activate back massage
motor with 30 minutes timer.
9 The back massage motor starts with intensity level 5 for
1 second and then drops to last intensity level used.
9 Whenever UP button is pressed, the back massage
intensity level is increased to 1 level higher. Whenever
DOWN button is pressed, the back massage intensity
level is decreased to 1 level lower.
9 If the UP or DOWN button is pressed for 2 seconds,
back massage motor stops. At the end of 30 minutes,
back massage motor is automatically turned off.
z Leg Massage Buttons
9 Press the UP or DOWN button to activate leg massage
motor with 30 minutes timer.
9 The leg massage motor starts with intensity level 5 for 1
second and then drops to last intensity level used.
9 Whenever UP button is pressed, the leg massage
intensity level is increased to 1 level higher. Whenever
DOWN button is pressed, the leg massage intensity
level is decreased to 1 level lower.
9 If the UP or DOWN button is pressed for 2 seconds, leg
massage motor stops. At the end of 30 minutes, leg
massage motor is automatically turned off.
 Wave Program 1
Both massage motors start and change intensity simultaneously. Back massage starts on
speed 1,2,3,4,3,2, repeatedly. Leg massage starts 4,3,2,1,2,3.
 Wave Program 2
Both massage motors start and change intensity simultaneously. Back massage starts on
speed 2,4,2,4 repeatedly. Leg massage starts 4,2,4,2 repeatedly.