User manual

LIVE series
20
ENIT
LIVE12A LIVE12 LIVE15A LIVE15
Systemtype Active – 2 way Passive – 2 way Active – 2 way Passive – 2 way
Built-in amp (W/RMS)
400W (330W LF +
70W HF)
450W (380W LF +
70W HF)
AES / Program Power 300W / 600W 350W / 700W
Recommended amp up to 600W RMS/8Ohm up to 700W RMS/8Ohm
Input impedance 10kOhm 8Ohm 10kOhm 8Ohm
Coverage angle 80°x60° (HxV) 80°x60° (HxV) 80°x60° (HxV) 80°x60° (HxV)
Frequency response 50-18.000Hz (±3dB) 55-18.000Hz (±3dB) 45-18.000Hz (±3dB) 50-18.000Hz (±3dB)
Low frequency 12” woofer / 3” coil 12” woofer / 3” coil 15” woofer / 3” coil 15” woofer / 3” coil
High frequency 1” driver / 1.7” coil 1” driver / 1.7” coil 1” driver / 1.7” coil 1” driver / 1.7” coil
Input sensitivity
-2dBu (0,6Vrms) adjust-
able
98dB @1W/1m
-2dBu (0,6Vrms) adjust-
able
98dB @1W/1m
Max SPL-Cont./Peak 122/128dB 123/129dB 122/128dB 123/129dB
Crossover frequency 2200Hz 2000Hz 2600Hz 1700Hz
User controls
mic, line, master, eq.
LF-HF
mic, line, master, eq.
LF-HF
Protection fast limiter, temp HF signal compression fast limiter, temp HF signal compression
Trapezoidal taper 45° 45° 45° 45°
Connections XLR in/out; VDE in 4 poles in/out connectors XLR in/out; VDE in 4 poles in/out connectors
Weight
25kg 21kg 30kg 25kg
Dimensions (WxHxD)
416x615x356mm 416x615x356mm 475x740x400mm 475x740x400mm
SPECIFICHE TECNICHE - TECHNICAL SPECIFICATION