Specifications

DRAWERINSTALLATION
Rating Label
.-" (24")
Rating Label
(3o")
Figure 9A
1. Place the drawer adjacent to the
wall or cabinet opening. Plug
the power supply cord into the
electrical outlet.
2. Carefully guide the unit into the
prepared opening. Avoid pinching
the cord between the appliance
and the wall.
PartsSupplied
4 Screws
Figure 9B
3. Slide the drawer in until the mounting flange _s
flush with the face of the cabinet.
4. Open the drawer. Using the 4 holes on the drawer
as a template, predrill the cabinet using a 1A6"drill
bit. See Figure 9A.
5. Secure the drawer with the 4 screws supplied.
See Figure 9B.
MODEL AND SERIALNUMBER
LOCATION
For models HHDV30S and HHD30
The name plate, including model and serial number,
is located on the faceplate behind the microwave
drawer front. See Figure 9A,
For model HHD24
The name plate includes the model and serial
number. Open the microwave drawer fully. The
label is located slightly beyond the back wall of the
microwave cavity facing up from the fiat surface.
See Figure 9A.
CARE, CLEANING AND
MAINTENANCE
Refer to the use & care manual for cleaning instructions.
BEFOREYOU CALL FOR
SERVICE
Read the BEFORE YOU CALL and operating instruction
sections in your use & care manual. It may save
you time and expense. The list includes common
occurrences that are not the result of defective
workmanship or materials in this range.
Refer to the warranty in your use & care manual
for Dacor's toll-free service number and address.
Please call or write if you have inquiries about your
microwave product and/or need to order parts.
E6