Operating instructions
3
Parts of the Range Hood
EXTERIOR
A CHIMNEY - The blower assembly, lters, light and
main power switch are located inside. The blower assem-
bly pulls heat and smoke into the chimney and vents
them up and outside.
B CHIMNEY OPENING - On the bottom of the range
hood. Access to the light, main power switch and lters is
through this opening. The blower assembly is also located
inside. The blower assembly pulls heat and smoke into the
chimney and vents them up and outside.
C CONTROL PANEL - Use the keys on the control panel
to control your hood’s various features.
D HOOD - The glass hood helps direct heat and smoke
into the chimney opening. It comes in different sizes and
colors. See the table below.
INTERIOR
E FILTERS - Prevent grease and grime from getting into
the blower assembly.
F MAIN POWER SWITCH - Controls power to the con-
trol panel, light and blower assembly.
G LIGHT - Single piece halogen bulb with built-in lens
and reector.
H MODEL AND SERIAL NUMBER LABEL - Located
behind the left lter.
View From Bottom of Hood
d
a
c
b
Glass Assembly Part Numbers
H
f ee
g
30 INCH (WIDE) GLASS 36 INCH (WIDE) GLASS
MODEL NUMBER COLOR MODEL NUMBER COLOR
PHG30TS Titanium Silver PHG36TS Titanium Silver
PHG30SG Sterling Gray PHG36SG Sterling Gray
PHG30BU Blue Water PH
G36BU Blue Water
PHG30AG Anthracite Gray PHG36AG Anthracite Gray
PHG30GN Slate Green PHG36GN Slate Green
PHG30BK
Black PH
G36BK Black