Specifications

.
If mounting the hood to brick or masonry:
. Drill five 5/16" X 1 1/2" holes in the locations
marked.
. Insert five of the provided wall anchors into the
five holes. The anchors provided are for attaching
the hood to masonry or brick only.
/
/
Mounting -- /
bracket _ _ // /_/i c_€:_
/ / _,_ Anchor
<"i'" j
-
/'_,_ _ "L" brackets
4"'"8¢
_'_ Template
Mounting to Brick or Masonry
Attach the blower assembly mounting bracket and the
"L" brackets securely to the wall (5 places).
Installing the Duct Work
iMPORTANT - The installed duct work must:
. Be centered on the vertical center line drawn on the
. wall.
Fit flush into the half circle on the chimney mount°
ing. bracket, if the duct work is to enter the chimney
through the ceiling rather than through the back wall).
Extend down as far as the top of the blower assemo
bly mounting bracket.
m
m
Duct through ceiling
J (option 1)
\
I
Ceiling mounting
bracket
/
m/
4, \
m
\ m l Wall
m-\
Duct through back
wall (option 2)
End of duct, even with
top of blower assembly
mounting bracket
Duct Work installation