Installation Manual

2
Installation Specifications
Model
A (Drawer Face
Width)
B (Chassis
Width)
C (Chassis Face
Width)
D (Drawer Face
Height)
E (Chassis
Depth)
F (Drawer Depth)
G (Chassis
Height)
IWD24
22 5/16” (56.7 cm) 22 1/4” (56.5 cm) 22 3/8” (56.8 cm)
8 15/16” (22.7 cm) 23 3/8” (59.4 cm) 23 13/16” (60.5 cm) 9 1/16” (23.0 cm)
IWD27
25 5/16” (64.3 cm) 25 1/4” (64.1 cm) 25 3/8” (64.5 cm)
IWD30
28 5/16” (71.9 cm) 28 1/4” (71.8 cm) 28 3/8” (72.1 cm)
OWD24
22 1/2” (57.1 cm) 22 1/2” (57.1 cm) 22 1/2” (57.1 cm) 11 7/8” (30.2 cm) 20” (50.8 cm) 18” (45.7 cm) 11 7/8” (30.2 cm)
40" (101.6 cm)
3 prong
120 Vac power cord
Chassis without
drawer installed
Mounting hole,
** = OWD24 mounting holes
**
**
**
**
9 places
G
Chassis Dimensions (IWD/OWD Series)
D
A
Drawer Face Dimensions
(IWD/OWD Series)
Chassis
Drawer open
F
E
5/16”
(8 mm)
B
C
Overall Dimensions - IWD/OWD Series
Top View
See next page for chassis dimensions for other models
Verifying the Package Contents
• (3) mounting screws - PN 83569
• Wire rack with mounting hardware (OWD24 only)
(1) PN 83619 (screw), (1) PN 83267 (clamp)
Installation Planning
• A qualified technician must install this built-in appliance.
Proper installation is the customer's responsibility.
• Carefully check the drawer's installation space to ensure
the drawer ia easily accessible and that electrical power
can be provided to the location. Install the warming
drawer in wood cabinets only.
• Plan the installation so all minimum clearances are met/
exceeded. Dimensions shown provide minimum
clearances unless otherwise noted. Ensure the drawer
can be fully opened without impediment.
• The specified minimum cabinet depth and width must be
provided. The cabinet depth and width must completely
enclose the recessed portion of the drawer.
• Cabinet cutout dimensions must be used as indicated. All
contact surfaces between the appliance and the cabinet
must be solid and level. The drawer-support platform
must be flush with the bottom edge of the cabinet cutout.
• Make certain that you have everything necessary to
ensure a proper installation before proceeding.
• A custom front panel is required for IWD series models
and optional for OWD24.
• An optional Epicure
®
style front panel kit is available for
model OWD24.