Installation Guide

10
Installation Instructions
Assembling the Cooktop
WARNING
Do not use the cooktop unless all burner components and
grates are properly in place.
• The range uses standard and SimmerSear burners.
• Use porcelain or brass burner caps as you prefer.
• When assembling the burners, rotate/adjust each part until it
seats securely in place for proper function.
• Gently set the grates in the spill tray so the feet of each grate
rest in their corresponding dimples formed into the spill tray.
Standard Burner Installation
STEP 1:
Put burner ring on
top of head.
STEP 2:
Turn burner ring until it
drops into place.
STEP 3:
Place burner caps on top
of rings.
• Flat surface is
pointing upward.
Burner head
Burner ring
SimmerSear™
burner
Standard
burner
Spill tray
SimmerSear™ Burner Installation
STEP 1:
Install burner
head.
• Put burner
head tab in
keyed hole.
STEP 2:
Install burner ring.
• Line up ring
tabs with head
slots.
STEP 3:
Place burner cap on top
of burner ring.
• Flat surface is
pointing upward.
Burner ring
Burner base
Burner head
Keyed
hole
Burner cap