User Manual
18 English
Operating the Cooktop
1.
around the burner head, and rotate the ring until it
drops into place.
2. Place the burner cap so the ridge on the bottom of the
Assembling the Burners
Assembling a Standard Burner
• After assembly, always test the burners for proper func-
tion. Improperly assembled parts cause faulty ignition and
•
let it cool. Adjust the caps, and reignite the burner. A good
Assembling a SimmerSear
TM
Burner
1. Place the burner head so its locating tab is in the
base’s keyed hole.
2.
the head.
3. Place the burner cap so the ridge on the bottom of the
1. With two hands, grasp a grate with the short sides
oriented at the front and rear of the cooktop.
2. Gently set the grate on the cooktop so the grate's feet
rest in their corresponding dimples in the spill tray.
3. Repeat Step 2 for the remaining grate(s).
Placing the Cooktop Grates
The grates are identical, so you can place them in the left, center, or right position but always with the short
side toward the front/rear of the cooktop.
tray.