User Manual

10 English
Important Safety Instructions
Use-and-Care Safety Instructions, cont.
to ensure proper installation.
Cooktop Safety
•  Burners should only be on when in use and should never be unattended.
•  Do not line the grates or any part of the cooktop with foil.
•  Before turning on a burner, ensure its components are properly seated.
•  If a burner ignites but does not stay lit, turn it off, wait 5 minutes for the gas to dissipate, and retry.
•  When setting a burner to simmer, turn the knob slowly; ensure the burner stays lit.
•  Place only cookware on the cooktop.
•  Do not drag cookware across the grates; lift to reposition cookware.
•  Do not drop cookware on the grates.
•  Do not use rough-bottomed cookware.
•  
•  
•  
•  Burners should be off and all surfaces cool before disassembling cooktop components.
•  Glazed Cooking Utensils – Only certain types of glass, glass/ceramic, ceramic, earthenware, or other glazed 
utensils are suitable for rangetop service without breaking due to the sudden change in temperature.
•  Do not pour water or other liquids on the cooktop.
•  After cleaning cooktop components, dry them thoroughly before reassembly.
•  Use Proper Pan Size – This appliance is equipped with one or more surface units of different size. Select 
utensils will expose a portion of the heating element to direct contact and may result in ignition of clothing. 
•  Utensil handles Should Be Turned Inward and Not Extend Over Adjacent Surface Units – To reduce the 
the handle of a utensil should be positioned so that it is turned inward, and does not extend over adjacent 
surface units.
•  Fry with minimal oil, heat the oil slowly, and watch as it heats; stand at a safe distance, and monitor the oil 
constantly; if combining oils, mix them before heating.
•  Know the oil's smoke point, and use a deep-fry thermometer to monitor the oil's temperature.
•  Do not fry frozen, icy, or overly cold food.
•  Let the oil cool to room temperature before moving the cookware.
•  Do not turn a burner-control knob past the ignition point until the burner is lit.
•  
•  Do not touch any part of a burner while the igniter is sparking.
•  
window, wait at least 5 minutes for the gas to dissipate, then try igniting the burner.
•  In case of a burn injury:
 – Immerse the scalded area in cool water for at least 10 minutes, then cover with a clean, dry cloth.
 – Do not apply creams, oils, or lotions.
 – Seek medical attention for severe burns.










