installation instructions

31English
Assembling Cooktop Components
Installation Instructions
 Match the D-shaped opening on the back of each knob
with the D-shaped valve shaft of the appropriate burner,
push the knob fully onto the shaft.
a. 


b. 
Final Installation, cont.
Installing the Burner-Control Knobs



Pro Knob for
HDPRS Models
Epicure Knob for
HDERS Models
Do not operate the cooktop unless all burner components are properly assembled.
Installing SimmerSear Burner Components
 
 Install the burner head so the burner head’s locating
tab is in the burner base’s keyed hole.
3. 
slots in the head.
 Install the burner cap so the ridge on the bottom of

