Specifications

9
InstallatIon InstructIons
Stack Burner Installation
Burner Head
Crown Burner
Stack Burner
Spill Tray
Burner Ring
Ridge on bottom
of burner cap
STEP 1: Put burner
ring on top of the head.
STEP 2: Turn ring until
it drops into place.
Twist back and forth to
assure proper seating.
STEP 3: Install burner
caps. Ridge on cap
must surround top of
ring.
Burner Head
Crown Burner Installation
Burner Base
Burner Ring
Ridge on bottom
of burner cap
STEP 1: Install
burner head. Put
locating tap into
keyed hole.
STEP 2: Install
burner ring. Line
up ring tabs with
head slots. Twist
back and forth
to assure proper
STEP 3: Install
burner cap. Ridge on
cap must surround
top of ring.
Keyed Hole
cooktop sEtup
WARNING
Never attempt to operate the cooktop with any of the burner
rings, burner caps or grates removed.
•
Install the Burner Components
NOTE: Do not attempt to adjust the burner air mixture
settings. All adjustments are preset at the factory.
Remove the burner rings, burner caps and grates from their
shipping packages.
Install the burners as shown.
Gently set the grates on top of the spill tray. Put the legs of
each grate inside the corresponding dimples.
•
•
•