User Manual

English14
Operations
Operations
Continuous operation
Temperature
preset
Temperature
Manual setting
Timer
• Every setting has a preset time of 1 hr., the time can be changed to a maximum of
12 hrs. 59 min. by pressing the +/- symbol next to the time display.
• To bypass the predetermined time limit and operate continuously, press on the power
pad for 5 seconds, the word SAB will show in the display. Do not press on +/- on the
time display, this will revert to a time function.
NOTE
In continuous mode, the temperature display shows the default temperature setting,
the heat level can be adjusted on each mode, by pressing on + or -, each pressing is
equivalent to 5 degree increment. the display will not reflect the change of setting. In
Infinite mode the unit has to be turned off manually.
WARNING
• When the warming drawer is on in continuous mode (∞), it will remain on until turned
off manually. To avoid a fire hazard or burns, exercise caution when operating the unit
in continuous mode.
• Food safety is an important consideration when using a warming drawer. In the Proof
and Low temperature settings, bacteria growth may occur. Use the Med and High
settings if holding certain foods for more than two to three hours.