Installation Instructions

Installation Instructions
Nominal Electrical-Supply Requirements
120 Vac, 60 Hz, 15 Amp., dedicated circuit
The unit comes with a 40” (101.6 cm) power cord with a 3-prong grounded plug.
Total Connected Load: 0.5 kW (4 Amp.)
• The owner shall ensure that a qualified electrician performs the installation, which
must comply with the latest revision of the National Electric Code ANSI/NFPA 70,
and local codes and ordinances.
• If the home's electrical service does not meet product specifications or does not
conform to the NEC or local standards, do not proceed until a licensed electrician
upgrades the electrical service.
• Ensure the outlet is easily accessible so the unit may be unplugged for service.
• Keep the power cord away from hot surfaces.
WARNING
• To avoid personal injury caused by the unit being pulled from its cutout when the
drawer is opened, secure the chassis to the cabinet as instructed. (See pg. 10.)
• Remove the drawer before securing the unit to the cabinet cutout.
• Unplug the unit before removing the drawer.
12 English
Remove and Re-Insert Drawer