Manual

Troubleshooting
English48
Troubleshooting
Surface burner
Problem Possible causes Action
All burners do not
light.
Cooktop unplugged
Make sure the power cord is plugged
into a live, grounded outlet.
Blown fuse; tripped circuit
breaker
Replace the fuse or reset the circuit
breaker.
Gas supply not properly
connected or turned on.
See your cooktop’s Installation
Instructions.
Surface burners do
not light.
The control knob is not set
properly.
Push in the control knob and turn it to
the Lite position.
• Burner caps not in
place
• Burner base misali
gned
• Clean the electrodes.
• Put cap on burner head.
• Align the burner base.
A burner clicks
during operation.
The control knob has been
left in the Lite position.
After burner ignites, turn control
knob to desired setting; if burner still
clicks, contact service technician.
The burners do
not burn evenly.
Burner components are not
assembled correctly.
Review pages 43-46.
Burners are dirty. • Clean the burner components.
• Review pages 40, 41, 43.
Oversized/yellow
burner flames.
The wrong burner orifice is
installed.
Check burner orifice size; if you have
wrong orifice (LP gas instead of natural
gas or vice versa), call technician.