Installation Guide

English 21
Installation Instructions
Installing the Rangetop, cont.
Making the Electrical Connections
WARNING
• Disconnect power at the main circuit breaker or fuse box before making electrical connections.
• BEFORE operating/testing, follow the grounding requirements (pg. 30) of this manual. Improper
connection of the grounding plug is an electric-shock risk.
• The electrical system (including power cord) is factory-installed/-wired. Altering any part of this
system may cause a short or overload.
1. Plug in the power cord. (Ensure the outlet meets all applicable electrical codes; see pg. 18.)
2. After installing the rangetop, check the gas-supply line to verify it was not damaged and
remains connected.
Assembling the Rangetop Burners
CAUTION
• Do not operate the rangetop burners without all burner parts in place.
• To avoid electric shock, do not:
– push in any burner controls while removing the burner.
– remove the top or touch the electrode of any burner while another burner is on.
1. Place the burner heads on their bases (see left).
The electrodes fit in the slot in the bottom of the
heads, which should lie flat.
2. Place the caps on their respective burner heads.