Installation Sheet

English42
Operations
Operations
09 Control Lock (3 sec)
Control Lock
(Main panel)
To prevent accidental setting changes, press and hold Control
Lock for 3 seconds. The main panel will be disabled and the Lock
indicator ( ) will turn on.
When Control Lock is on, the indicator blinks if any button (except
for the Control Lock button) on the main panel is pressed.
If you press and hold the button again for more than 3 seconds,
Control Lock will be deactivated.
However, Control Lock will be reactivated if no button is pressed
within 1 minute.
NOTE
Control Lock on the main panel does not affect the dispenser.
The dispenser operates independently and so does the dispenser
lever. To lock the dispenser and the dispenser lever, use the Lock
function on the dispenser.
Device
authentication
When connecting the refrigerator to SmartThings App, follow the
app’s or device’s onscreen instructions and press and hold Control
Lock for 5 seconds. The temperature panel displays “on” for 5
seconds before proceeding with the authentication procedure.
Note that the Control Lock function will be not affected by this
authentication.
10 Cooling Off
Cooling Off mode (also called Shop mode), is designed for use by retailers when they are
displaying refrigerators on a retail oor.
In Cooling Off mode, the refrigerator’s fan motor and lights operate normally, but the
compressors do not run so that neither the refrigerator nor the freezer get cold.
To enter Cooling Off mode, press and hold Ice Maker, Auto Water Fill, and Door Alarm for
5 seconds.
The refrigerator chime sounds, and the refrigerator shows O on the fridge display and FF
on the freezer display.
DACOR_RF8000MC_DA68-03563J-04_EN.indd 42 2020-12-11  5:16:56