Installation Guide
Table Of Contents
- Dacor_FDR_BRF8000M_IM_DA68-03621A-07_EN
- Before you begin...
- Customer-Service Information
- Important Safety Instructions
- Safety and warning information
- Installation Specifications
- Product Specifications
- Installation
- Installation requirements
- Installation instructions
- 1. Uncrating the Refrigerator
- 2. Moving the Refrigerator
- 3. Installation preparation
- 4. Attaching the anti-tip-bracket
- 5. Remove Upper Door Cover, Kickplate
- 6. Attaching the Refrigerator’s Top Cover
- 7. Adjusting the door Opening Angle
- 8. Moving the Refrigerator Into Its Enclosure
- 9. Leveling the Refrigerator
- 10. Securing the Refrigerator
- 11. Attaching Panel brackets
- 12. Hanging a Custom Panel
- 13. Aligning the Panel
- 14. Attaching the Door’s Interior Covers
- 15. Connecting the Water Line
- 16. Attaching kickplate and Toe kickplate
- 17. Attaching the Refrigerator Trim
- 18. Attaching Trim Top Cover
- 19. Removing the Interior packaging
- 20. Adjusting the door spring
- 21. Cleaning
- 22. Installation Checklist
- Dacor_FDR_BRF8000M_IM_DA68-03621A-07_MES
- Antes de comenzar...
- Información de Atención al cliente
- Instrucciones importantes de seguridad
- Información de seguridad y advertencias
- Especificaciones de instalación
- Especificaciones del producto
- Instalación
- Requisitos de instalación
- Instrucciones de instalación
- 1. Desembalar el refrigerador
- 2. Desplazar el refrigerador
- 3. Preparación para la instalación
- 4. Colocar el soporte antivuelco
- 5. Retirar la cubierta superior de la puerta, placa de protección
- 6. Colocación de la tapa superior del refrigerador
- 7. Ajuste del ángulo de apertura de la puerta
- 8. Colocar el refrigerador en su estructura
- 9. Nivelar del refrigerador
- 10. Ajuste del refrigerador
- 11. Ajuste de los soportes del panel
- 12. Colgar un panel personalizado
- 13. Alinear el panel
- 14. Colocar las cubiertas interiores de la puerta
- 15. Conectar la tubería de agua
- 16. Colocar la placa de protección y el zócalo
- 17. Colocar el borde del refrigerador
- 18. Instalar el borde de la cubierta superior
- 19. Retirar el empaque interno
- 20. Ajustar el resorte de la puerta
- 21. Limpieza
- 22. Lista de verificación de instalación
- Dacor_FDR_BRF8000M_IM_DA68-03621A-07_CFR
- Avant de commencer...
- Informations relatives au service client
- Consignes importantes relatives à la sécurité
- Consignes et avertissements de sécurité
- Spécifications relatives à l'installation
- Caractéristiques techniques de l'appareil
- Installation
- Exigences relatives à l'installation
- Instructions d'installation
- 1. Déballage du réfrigérateur
- 2. Déplacement du réfrigérateur
- 3. Préparation à l'installation
- 4. Fixation du support antibasculement
- 5. Retrait du cache supérieur de la porte, plinthe
- 6. Fixer le cache supérieur du réfrigérateur
- 7. Ajustement de l’angle d’ouverture de la porte
- 8. Placer le réfrigérateur dans son caisson
- 9. Mise à niveau du réfrigérateur
- 10. Fixation du réfrigérateur
- 11. Fixation des supports du panneau
- 12. Fixation d'un panneau personnalisé
- 13. Alignement du panneau
- 14. Fixation des caches intérieurs de la porte
- 15. Raccordement de la conduite d'eau
- 16. Fixation de la plinthe et de la patte
- 17. Fixation de l'habillage du réfrigérateur
- 18. Fixation du cache supérieur de l'habillage
- 19. Retrait de l'emballage intérieur
- 20. Ajustement du ressort de la porte
- 21. Nettoyage
- 22. Liste de vérifications pour l'installation
English 47
16. Attaching kickplate and Toe kickplate
Attaching kickplate
• Drive the screws on both sides to attach the kickplate.
M4x8 2 ea
Kickplate
Kickplate
Attaching Toe kickplate
• The height of the product can be adjusted between 83 3/8” ~ 84 3/8”.
• If you want to use the provided Dacor toe kickplate (4”), note that it was designed for a
product height of 83 7/8” and cabinet height of 84”.
• If you want to use a toe kickplate not provided by Dacor, adjust the height of the toe
kickplate accordingly.
• You can extend the bracket to move the kickplate by a max of 32 mm to the front. To
extend the bracket, you must remove the grill cover rst.
Toe kickplate
Grill cover
Kickplate
Grill cover
BRACKET
Kickplate
Factory default 32 mm to the front
Dacor_FDR_BRF8000M_IM_DA68-03621A-07_EN.indd 47 2020-11-16 4:22:49