Installation Guide
Table Of Contents
- Dacor_FDR_BRF8000M_IM_DA68-03621A-07_EN
- Before you begin...
- Customer-Service Information
- Important Safety Instructions
- Safety and warning information
- Installation Specifications
- Product Specifications
- Installation
- Installation requirements
- Installation instructions
- 1. Uncrating the Refrigerator
- 2. Moving the Refrigerator
- 3. Installation preparation
- 4. Attaching the anti-tip-bracket
- 5. Remove Upper Door Cover, Kickplate
- 6. Attaching the Refrigerator’s Top Cover
- 7. Adjusting the door Opening Angle
- 8. Moving the Refrigerator Into Its Enclosure
- 9. Leveling the Refrigerator
- 10. Securing the Refrigerator
- 11. Attaching Panel brackets
- 12. Hanging a Custom Panel
- 13. Aligning the Panel
- 14. Attaching the Door’s Interior Covers
- 15. Connecting the Water Line
- 16. Attaching kickplate and Toe kickplate
- 17. Attaching the Refrigerator Trim
- 18. Attaching Trim Top Cover
- 19. Removing the Interior packaging
- 20. Adjusting the door spring
- 21. Cleaning
- 22. Installation Checklist
- Dacor_FDR_BRF8000M_IM_DA68-03621A-07_MES
- Antes de comenzar...
- Información de Atención al cliente
- Instrucciones importantes de seguridad
- Información de seguridad y advertencias
- Especificaciones de instalación
- Especificaciones del producto
- Instalación
- Requisitos de instalación
- Instrucciones de instalación
- 1. Desembalar el refrigerador
- 2. Desplazar el refrigerador
- 3. Preparación para la instalación
- 4. Colocar el soporte antivuelco
- 5. Retirar la cubierta superior de la puerta, placa de protección
- 6. Colocación de la tapa superior del refrigerador
- 7. Ajuste del ángulo de apertura de la puerta
- 8. Colocar el refrigerador en su estructura
- 9. Nivelar del refrigerador
- 10. Ajuste del refrigerador
- 11. Ajuste de los soportes del panel
- 12. Colgar un panel personalizado
- 13. Alinear el panel
- 14. Colocar las cubiertas interiores de la puerta
- 15. Conectar la tubería de agua
- 16. Colocar la placa de protección y el zócalo
- 17. Colocar el borde del refrigerador
- 18. Instalar el borde de la cubierta superior
- 19. Retirar el empaque interno
- 20. Ajustar el resorte de la puerta
- 21. Limpieza
- 22. Lista de verificación de instalación
- Dacor_FDR_BRF8000M_IM_DA68-03621A-07_CFR
- Avant de commencer...
- Informations relatives au service client
- Consignes importantes relatives à la sécurité
- Consignes et avertissements de sécurité
- Spécifications relatives à l'installation
- Caractéristiques techniques de l'appareil
- Installation
- Exigences relatives à l'installation
- Instructions d'installation
- 1. Déballage du réfrigérateur
- 2. Déplacement du réfrigérateur
- 3. Préparation à l'installation
- 4. Fixation du support antibasculement
- 5. Retrait du cache supérieur de la porte, plinthe
- 6. Fixer le cache supérieur du réfrigérateur
- 7. Ajustement de l’angle d’ouverture de la porte
- 8. Placer le réfrigérateur dans son caisson
- 9. Mise à niveau du réfrigérateur
- 10. Fixation du réfrigérateur
- 11. Fixation des supports du panneau
- 12. Fixation d'un panneau personnalisé
- 13. Alignement du panneau
- 14. Fixation des caches intérieurs de la porte
- 15. Raccordement de la conduite d'eau
- 16. Fixation de la plinthe et de la patte
- 17. Fixation de l'habillage du réfrigérateur
- 18. Fixation du cache supérieur de l'habillage
- 19. Retrait de l'emballage intérieur
- 20. Ajustement du ressort de la porte
- 21. Nettoyage
- 22. Liste de vérifications pour l'installation
English 17
Installation
WARNING
Do not install the appliance:
• outdoors,
• in an environment with dripping water.
Appliance is very heavy :
FDR 36” approx. 562 Ib / 255 kg
Installation room
The appliance should be installed in a dry, ventilated room.
Stable installation
The appliance is very heavy and has a tendency to tilt forwards when the appliance door
is opened.
Do not open the door until there is no possibility of the appliance tipping over.
The most secure way to install the appliance is to use the supplied anti-tipping devices.
Floor
The subsurface must be level and even in order to ensure that the appliance is securely
installed and works correctly.
The subsurface must be made from a hard, non-exible material.
Aligning the appliance
To ensure that the appliance functions correctly, it must be levelled properly.
If the appliance is not level, water may ow out of the ice maker, ice cubes may be
irregular or the doors may not close properly.
Dacor_FDR_BRF8000M_IM_DA68-03621A-07_EN.indd 17 2020-11-16 4:22:38