Specifications

16
Installation Instructions
Installation Checklist
WARNING
To ensure a safe and proper installation, the installer
must perform the following checklist to ensure that no
part of the installation has been overlooked. Proper
installation is the responsibility of the homeowner.
□ Has the plastic coating been peeled off of the outside
of the range? Have all packaging materials been
removed from inside the oven?
□ Are all leveling legs extended down to make contact
with the floor? Is the unit level? See page 8.
□ Is the range secured in place with the provided anti-tip
bracket according to these instructions? See pages
8 and 13.
□ Is the range connected to a grounded three prong
electrical outlet that has been installed by a licensed
electrician according to these instructions and in
accordance with all applicable electrical codes? See
pages 5 and 16.
□ Is the backguard installed?
□ Has the gas supply inlet pressure been measured to
ensure that it does not exceed the maximums stated in
these instructions? See page 5.
□ Is the range connected to the gas supply according to
these instructions and in accordance with all applicable
codes? See pages 5 and 12.
□ Did the installer check the gas supply for leaks?
□ Is the oven door properly installed according to these
instructions? See page 13.
□ Are the burners and grates properly installed according
to these instructions? See page 14.
□ Has proper operation been verified?
□ Has the warranty been activated on-line or the warranty
card been filled out completely and mailed?