User Manual
English  19 
Important safety instructions
Installation safety
WARNING
To reduce the risk of fire, electric shock, personal injury, or death, observe these 
precautions:
•  The appliance should be installed and properly grounded by a qualified installer, as 
specified in the Installation Instructions. Adjustments and service should be performed 
only by qualified installer or service technician.
•  Do not try to service/modify/replace the appliance or any part of it unless specifically 
recommended in this manual. All other service should be performed by a qualified 
technician.
•  Use only new, flexible connectors when installing the appliance.
•  Make sure the anti-tip device is properly installed on the range. See the installation 
instructions for more information.
•  Due to the size and weight of the range, have two or more people move the range.
•  Remove all tape and packaging materials.
•  After unpacking the range, remove all accessories from inside and around it. 
(Cautiously handle the heavy grates and griddles.) 
•  Make sure no parts came loose during shipping.
•  Make sure your range is correctly installed / adjusted by a qualified service technician 
or installer for the type of gas (natural or LP) you will use. For your range to utilize LP 
gas, the installer must replace every surface burner orifice with the provided LP orifice 
set, and reverse the GPR adapter. These adjustments must be made by a qualified 
technician according to manufacturer instructions and local regulations. The qualified 
agency performing this work shall be responsible for the gas conversion.
•  Installation of this range must conform with local codes or, in the absence of local 
codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA.54, latest edition. In 
Canada, installation must conform with the current Natural Gas Installation Code, CAN/
CGA-B149.1, or the current Propane Installation Code, CAN/CGA-B149.2, and with local 
codes where applicable. This range has been design-certified by ETL according to ANSI 
Z21.1, latest edition, and Canadian Gas Association according to CAN/CGA-1.1, latest 
edition.
NY9900M_PRO RANGE_DOP48M96DLM_DG68-00935A-00_EN+MES+CFR.indb 19 2017-05-12  7:28:32










