User Manual

English 107

Care and maintenance - Cooktop

Burner grates and components

Turn off all surface burners and make sure they have all cooled down.

1. Remove the burner grates.

2. Remove the burner caps from the

burner heads.

3. Remove the burner heads from the

valve manifolds to reveal the starter

electrodes.

4. Clean the grates and burner

components in warm, soapy water. (Do

not use steel-wool pads or abrasive

cleaners.)

5. Rinse and dry grates and burner

components thoroughly. Ensure the

burner ports are free of water.

6. Reassemble the burner heads, making

sure to insert a starter electrode

through the hole in each head.

NOTE

See Pages 111-114 for details on how to

reassemble the burner components.

7. Reassemble the remaining burner

components, making sure the caps lie

flat on top of the heads.

8. Re-install the burner grates in their

respective positions.

9. Turn on each burner to verify that

it works properly, then turn off the

burner.

NY9900M_PRO RANGE_DOP48M96DLM_DG68-00935A-00_EN+MES+CFR.indb 107 2017-05-12  7:29:02