Planning Guide

Appliance dimensions
¹ Vertical distance from range grate level to combustible overhead surface; if installing an
overhead vent hood, also check hood specifications for minimum required clearances.
² Cabinet/countertop depth is at the discretion of customer but cabinet face MUST NOT
protrude further than rear of front panel, see product dimensions.
³ Consult local code for exact location requirements.
⁴ Vertical distance from grate level to combustible surface.
⁵ This specification does not apply for cabinets more than a horizontal distance of 10” (25.4 cm)
from the edge of the range.
② Plan the cabinet layout depending on
install method