Manual

English6

Before you begin

Water reservoir

The water reservoir is used for the functions with steam, like Steam Bake, Steam Roast,

GreenClean™, Steam, etc. And it is also needed for removing water scale that may form on

the oven walls, especially after using functions with steam. Fill it with water in advance of

using cooking functions with steam.

1. Pull the water reservoir out.

For 48" Pro range, the water reservoir

is located on the left side of the range,

just above the oven. It can be pulled

out by grasping the handle at the front

of the reservoir and just pulling.

For 36" Pro range, the water reservoir

is located on the right side of the

range, just above the oven. Because

the water reservoir for 36" Pro range

does not have any handle, press OPEN/

CLOSE RESERVOIR on the control panel

to pull it out. After it comes out, it can

be removed by hand.

NOTE

• The water reservoir can be heated

by oven operation. Be careful when

touching the water reservoir.

• The water reservoir can be completely

pulled out from the appliance. It is

recommended to check the amount of

water filled in. Also, it is possible to fill

in the water without pulling out the

water reservoir completely.

2. Open the reservoir cap, and then fill

the reservoir with tap water.

NOTE

You can open the reservoir by removing

the rubber cap or by removing the clear

plastic top. To avoid spilling water, filling

water through the hole after removing

rubber cap is recommended.

NY9900M_PRO RANGE_DOP48M96DLM_DG68-00935A-00_EN+MES+CFR.indb 6 2017-05-12  7:28:30