Manual

English112
Care and maintenance - Cooktop
Care and maintenance - Cooktop
3. Match the burner caps to the burners
by size, and then re-install the caps on
the burner heads.
CAUTION
Each cap fits on a specific burner head.
Verify that each cap is installed and lies
flat on the correct head.
Round Burner head / caps
1. Put the burner heads on the burner
bases as shown at the left. The bottom
of the burner head fits inside the top of
the burner base.
2. Turn the head until it drops into place.
Twist each head clockwise and counter-
clockwise slightly to make sure it is
properly seated.
3. Place the burner caps (brass or
porcelain) atop the burner rings. The
ridge around the bottom of each cap
fits around the top of the ring.
CAUTION
Verify that all burner components rest
stably in place. If any components are
askew, disassemble them, and redo the
installation for any improperly installed
components.
NY9900M_PRO RANGE_DOP48M96DLM_DG68-00935A-00_EN+MES+CFR.indb 112 2017-05-12  7:29:04