Manual

English108

Care and maintenance - Cooktop

Burner caps and heads

NOTE

Before removing the burner caps and heads, remember their size and location. Replace

them in the same location after cleaning.

Wash burner caps and burner heads in hot, soapy water and rinse with clean running

water. You may scour with a plastic scouring pad to remove burned-on food particles.

Use a sewing needle or twist tie to unclog the small holes in the burner head, if required.

CAUTION

• Do not wash any burner parts in a dishwasher.

• Do not use steel wool or scouring powders to clean the burners.

Brass burner head

Brass burner cap

NOTE

• The brass parts of your burner will

change color. However, this will not

affect performance.

• After cleaning, check that all burner

ports are unclogged.

• You may swap out the original burner

caps for porcelain caps if desired.

• To remove burnt on grease, soak the

brass burner cap in 1 cup of water and

either 1 table spoon of white vinegar or

1 table spoon of lemon juice. Do not use

metallic brush while cleaning it. It can

damage the brass parts.

NY9900M_PRO RANGE_DOP48M96DLM_DG68-00935A-00_EN+MES+CFR.indb 108 2017-05-12  7:29:03