Installation Manual

English 53
Installation instructions
Door adjustment (DOP48M96DL* Only)
After re-installing the oven doors, make sure the oven doors to be parallel and flush.
There are 3 bolts around the Steam oven, one on the right-upper side of the steam oven,
and two under the each door hinge. The upper bolt helps adjusting the door back and
forth. The lower two bolts help adjusting the door up and down.
Lifting hinge latch up
To adjust door up and down
1. Remove door and remove 2 screws
on door hinge latch.
2. Turn the bolt under each door hinge
latch.
3. After adjusting the door hinge latch,
fasten the 2 screws again.
4. Re install the door.
NOTE
Lifting the door hinge latch too much will
make it hard to fasten the two screws.
Make sure the door hinge latch is firmly
fixed after adjustment.
To adjust door back and forth, turn the
upper bolt as shown on the left picture.
Install_NY9900M_PRORANGE_DOP48M96DLM_DA_DG68-00936A-00_EN+MES+CFR.indb 53 2017-05-12  7:36:53