Installation Manual
English  15 
Important safety instructions
Installation safety
WARNING
To reduce the risk of fire, electric shock, personal injury, or death, observe these 
precautions:
•  This product should be installed and 
properly grounded by a qualified 
installer, as specified in the Installation 
Instructions. Adjustments and service 
should be performed only by qualified 
gas range installer or service technician.
•  Do not try to service/modify/replace the product or any part of it unless specifically 
recommended in this manual. All other service should be performed by a qualified 
technician.
•  Use only new, flexible connectors when installing the product.
•  Make sure the anti-tip device is properly installed. (See the Installation Instructions for 
details.)
•  Due to the size and weight of the range, have two or more people move the range.
•  Remove all tape and packaging materials.
•  After unpacking the product, remove all accessories from inside and around it. 
(Cautiously handle the heavy grates.)
•  Make sure no parts came loose during shipping.
•  Make sure the product is correctly installed/adjusted by a qualified service technician 
or installer for the type of gas (natural or LP) you will use. For the range to use LP gas, 
the installer must replace every surface burner orifices with the provided LP orifice 
set, and reverse the GPR adapter. These adjustments must be made by a qualified 
technician according to manufacturer instructions and local regulations. The qualified 
agency performing this work shall be responsible for the gas conversion.
•  Installation of this range must conform with local codes or, in the absence of local 
codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA.54, latest edition. In Canada, 
installation must conform with the current Natural Gas and Propane Installation Code, 
CAN/CGA-B149.1, or the current Propane Installation Code, CAN/CGA-B149.2, and with 
local codes where applicable. This range has been design-certified by UL according to 
ANSI Z21.1/CSA 1.1, latest edition.
Install_NY9900M_PRORANGE_DOP48M96DLM_DA_DG68-00936A-00_EN+MES+CFR.indb 15 2017-05-12  7:36:38










