Installation Instructions

English 57
Installation instructions
Round Burner head / caps
1. Put the burner heads on the burner
bases as shown at left. The bottom of
the head fits within the burner base.
2. Turn the head until it drops into place.
Twist the head back and forth slightly
to ensure it is properly seated.
3. Put the burner caps (brass or porcelain)
atop the burner heads. The ridge
around the bottom edge of the cap fits
around the top of the burner head.
CAUTION
Ensure all burner components (heads and
caps) rest flat and snugly in place.
Install_NY9900M_PRORANGE_DOP48M96DLM_DA_DG68-00936A-00_EN+MES+CFR.indb 57 2017-05-12  7:36:54