Installation Instructions

English28
Installation requirements
Installation requirements
1
Vertical from range grate level to combustible overhead surface; if installing an
overhead vent hood, also check hood specifications for minimum required clearances.
2
Cabinet/countertop depth is at discretion of customer but cabinet face MUST NOT
protrude further than rear of front panel, see product dimensions.
3
Consult local code for exact location requirements.
4
Vertical from grate level to combustible surface.
5
This specification does not apply for cabinets more than a horizontal distance of 10”
(25.4 cm) from the edge of the range.
Location requirements
DOP48M96DL*
Gas Inlet
Back of range
Shown with
electrical access
cover removed
E - Electrical wiring
access hole in bottom
67.6 cm
(26 5/8")
16.8 cm
(6 5/8")
13.9 cm
(5 1/2")
20.6 cm
(8 1/8")
Install_NY9900M_PRORANGE_DOP48M96DLM_DA_DG68-00936A-00_EN+MES+CFR.indb 28 2017-05-12  7:36:47