Manuals(1)

Cooktop Maintenance
Assembling the Burner Heads and Caps, cont.
62 English
Keyed hole
Locating
tab
Burner base
Burner head
1. With power off and all surfaces cool, place the
burner head so the locating tab goes into the
keyed hole.
Tabs Slots
Burner
ring
2. Put the burner rings on the burner heads. Match
the tabs on the ring bottom to the slots on the
head. Twist each ring back and forth slightly until
it drops into place.
SimmerSear Burner Assembly
Ridge on
bottom of
burner cap
3. Put the burner caps on the burner rings. The
ridge around the bottom edge of the cap fits
around the top of the ring.
NOTE
After assembling the burners, test for proper function. Improper assembled parts will cause poor
ignition or uneven flames (see below). If the flame and excessively yellow, shut off the burner
immediately and let it cool. Adjust the burner caps, and relight the burner. A good flame is blue
and even all around the burner.