Manuals(1)
Cooktop Maintenance
Assembling the Burner Caps and Heads
English 61
1. Orient the burner head so the electrode opening
aligns with the electrode.
2. Install the burner head so the electrode passes
through its hole in the head.
(Ensure the burner head lies flat on the cooktop.)
Dual-Burner Head/Caps
Round Burner Head/Caps
3. Match the burner caps to the burners by size,
then install the caps on the burner heads.
CAUTION
Each cap fits a specific burner head. Verify that each
cap is installed and lies flat on the correct head.
1. Put the burner heads on the burner bases as
shown at left. (The bottom of the head fits inside
the top of the base.)
2. Twist each head back and forth slightly until it
drops into place.
3. Place the burner caps atop the burner rings. The
ridge around the bottom of each cap fits around
the top of the ring.