Manuals(1)

Using the Basic Oven
Using Settings, cont.
Display
50 English
Brightness—You can change the brightness of the display screen.
Tap SETTINGS > Display > Brightness, and use the adjacent bar to adjust screen brightness.
Screen Saver—If screen saver is off, the Clock theme and Timeout menu are disabled.
Tap SETTINGS > Display > Screen saver, then tap OFF on the right screen.
Clock Theme
Tap SETTINGS > Display > Clock theme, then tap the right screen, and select a theme.
Timeout
Tap SETTINGS > Display > Timeout, then tap the right screen, and select a time (5 – 60 min.).
Temp
Temp unit—You can program the oven control to display the temperature in Fahrenheit or Celsius.
The oven has been preset at the factory to display in Fahrenheit.
Tap SETTINGS > Temp > Temp unit, then tap the right screen, and select °C or °F.
Temp adjust—Oven temperature is factory calibrated. When first using the oven, follow recipe times
and temperatures. If the oven cooks too hot/cool, you can recalibrate the oven temp. Before doing
so, test a recipe by using a higher/lower temp than the recipe stipulates. The results will help you to
decide the degree of adjustment. (Oven temp can be adjusted ±35 °F (±19 °C). This adjustment will
not affect broil or the self-clean temp's. The adjustment will be retained after a power failure.
Tap SETTINGS > Temp > Temperature Adjust, then tap in the right screen, and adjust the temp.
Temp can be increased/decreased by 35 °F (19 °C).
Volume
Adjust the volume level for beeps and melodies.
Tap
SETTINGS
> Volume, then use the adjacent bar to adjust the volume.
Lighting
Dacor's Pro range has two distinctive lighting features: "Shower lighting" shines on knobs from
above; "Welcome lighting" is an array that appears when you lift the LCD panel.
To adjust Shower lighting, tap SETTINGS > Lightings, and select On, Automatic, or Off.
To adjust Welcome lighting, tap SETTINGS > Lightings, and select On or Off.
12-hour Energy Saving
This feature turns the oven off after 12 hours of baking or 3 hours of broiling.
1. Tap SETTINGS > 12 hour energy saving, then tap ON on the right screen.
2. The 12-hour energy saving icon appears in the indicator area.
Water Hardness (DOP48M96DL only)
Adjust water hardness for the Steam oven. (The harder the water, the more you need to descale.)
Tap SETTINGS > Water hardness , and select Soft, Medium, or Hard.