Installtion Manual

32 English
Installation Instructions
1. Put the burner heads in place as shown. The locat-
ing tab on the burner head goes in the keyed hole as
shown.
2. Put the burner rings on the burner heads as shown.
Match the tabs on the bottom of the ring to the slots
on the head. Twist each ring back and forth slightly to
verify it is properly seated.
3. Put the burner caps on the burner rings. Use either
the supplied brass or porcelain caps. The ridge around
the bottom edge of the cap goes around the top of the
burner ring.
Be sure electrical power is off and all surfaces are cool before cleaning any part of the cooktop.