manual
12 English
Installation Safety
•
•
perform all other service.
•
• Ensure the anti-tip device is installed per the Installation Instructions.
• Use two or more people to move the range.
• After unpacking, remove all accessories from inside and around it. (Cautiously handle the heavy grate.
• Check for parts that loosened during shipping.
•
•
the GPR adapter per manufacturer instructions and local regulations. The agency doing this work shall be
responsible for the conversion.
• Installation must comply with local codes or, in their absence, with the National Fuel Gas Code, ANSI Z223.1/
NFPA.54, latest edition. In Canada, installation must comply with the current Natural Gas Installation Code,
CAN/CGA-B149.1, or the current Propane Installation Code, CAN/ CGA-B149.2, and with local codes as appli-
per CAN/CGA-1.1 (latest edition).
Location Safety
• This range is for indoor, household use only, away from weather, water, strong drafts.
•
of ¼-in. plywood or similar insulator.
• Do not hang long curtains or paper blinds on any window next to the range.
•
• Wall coverings around the range must withstand heat up to 200 °F (93 °C).
• If overhead storage is needed, allow at least 30" (76.2 cm) between the cooking surface and the bottom of
the cabinets, or install a range hood that projects at least 5" (12.7 cm) beyond the cabinetry face.
Important Safety Instructions