User Manual

42 English
Operating the oven
Operating the oven
Settings
In Settings, you can change the default settings to your preference or diagnose
problems with the network connection.
START
4:35 PM
Convection Bake
Faster, more even baking
UPPER
325
°F
LIGHTTIMER
SETTINGS
OPEN/CLOSE
RESERVOIR
LOWERUPPER
TIP
None
Cook Time
InstantHeat™
Off
Delay Start
None
Tap Settings . The display will show the
Setting item.
Wi-Fi
To enable a Wi-Fi connection
1. Tap Settings
> Wi-Fi, and then tap ON in the right screen.
2. Tap Wi-Fi, and then tap a Wi-Fi network in the list that appears.
3. You will be prompted to provide a password for a secure network. Enter the
password.
To manually input an IP
1. Tap Settings
> Wi-Fi, and then tap ON in the right screen.
2. Tap Add Network.
3. Enter an IP manually, and then tap CONNECT to apply your settings.
NOTE
• To disable a Wi-Fi connection, Tap Settings
> Wi-Fi, and then tap OFF in the
right screen.
• For details about the Wi-Fi connection and using the SmartThings app, see the
SmartThings app user manual.
iQ control
To start the oven remotely.
• Tap Settings > iQ Control, and then tap ON of UPPER or LOWER. (See the
using the iQ control feature section on page 33.)
Draining
Water is draining after Steam function use.
4:35 PM
UPPER
START
LIGHTTIMER
SETTINGS
OPEN/CLOSE
RESERVOIR
LOWERUPPER
3. Tap START. The oven drains water
from the steam generator to the water
reservoir.
Draining
Draining…
Caution: Hot Water.
Do not remove Water Reservoir while draining.
4:35 PM
UPPER
View
Summary
LIGHTTIMER
SETTINGS
OPEN/CLOSE
RESERVOIR
LOWERUPPER
Draining is complete.
OK
LIGHTTIMER
SETTINGS
OPEN/CLOSE
RESERVOIR
LOWERUPPER
4. When draining is complete, use oven
gloves to remove and empty the water
reservoir.
NOTE
Once the oven starts draining, please wait until the draining cycle is complete.
DOB30P977D_AA_DG68-01313A-00_EN+MES+CFR.indb 42 2020-07-07 �� 5:15:30