Spec Sheet

DHW421 | 42” WALL CHIMNEY HOODS
42” WALL CHIMNEY
HOODS
DHW421
◊ 8” diameter exhaust. Can accommodate up to a 10”
duct.
◊ Squirrel cage style blower. 4 blower speeds.
◊ Auto off setting after 4 hours.
◊ Blue illuminated electronic control panel.
◊ 10 minute Timer (motor runs for 10 minutes and then
automatically shuts off).
◊ 20 watt halogen lights (can be used w/ 10, 20, or 30w
bulbs)
◊ Easy-to-clean Baffle Filter System, dishwasher safe.
◊ Hood can be installed to exhaust through the ceiling or
rear wall
FEATURES & BENEFITS
G
ENERAL PROPERTI ES
FINISH STAINLESS STEEL
OPTIONAL ACCESSORIES
RECIRCULATION KIT AVDH1
NUMBER OF MOTO
RS
(1) SINGLE BLOWER 600 CFM
TECHNICAL INFORMATION
CIRCUIT REQUIREMENTS
120VAC, 15AMP, GROUNDED
DEDICATED, 3-WIRE
CIRCUIT
TOTAL CONNECTED LOAD 120VAC/60HZ
MAX CURRENT DRAW 3.6 AMPS
SHIPPING WEIGHT 71 LBS
PRODUCT DIMENSIONS
WALL DIMENSIONS (H X W X D) (IN.) 30 1/4”-42" X 42” X 24”
DHW MODEL
**Warranty: Limited, parts and labor for one year
T
olerances: –1/16” (–1.6 mm), -0 unless otherwise stated
Chimney
24”
(61.0 cm)
Min. 30 1/4” (76.8 cm)
Max. 42” (106.7 cm)
30” - 36” - 42” - 48”
15”
(38.1 cm)
11 3/4”
(29.8 cm)
5 3/4”
(14.6 cm)
12 1/2”
(31.8 cm)
16 1/4” *
(41.3 cm)