Specifications

DHW301 | 30” WALL CHIMNEY HOODS
30” WALL CHIMNEY
HOOD
DHW301
◊ 8” diameter exhaust. Can accommodate up to a 10” duct.
◊ Squirrel cage style blower. 4 blower speeds.
◊ Auto off setting aer 4 hours.
◊ Blue illuminated electronic control panel.
◊ 10 minute Timer (motor runs for 10 minutes and then
automatically shuts off).
◊ 20 watt halogen lights (can be used w/ 10, 20, or 30w
bulbs)
◊ Easy-to-clean Baffle Filter System, dishwasher safe.
◊ Hood can be installed to exhaust through the ceiling or
rear wall
FEATURES & BENEFITS
DHW MODEL
GENERAL PROPERTIES
FINISH STAINLESSSTEEL
OPTIONAL ACCESSORIES
RECIRCULATIONKITFORDHW AVDH
NUMBER OF MOTORS
SINGLEBLOWER CFM
TECHNICAL INFORMATION
CIRCUITREQUIREMENTS
VACAMPGROUNDED
DEDICATEDWIRECIRCUIT
TOTALCONNECTEDLOAD VAC/HZ
MAXCURRENTDRAW AMPS
SHIPPINGWEIGHT LBS
PRODUCT DIMENSIONS
WALLDIMENSIONSHXWXDIN 30 1/4”42”” X ” X ”
**Warranty: Limited, parts and labor for one year
Chimney
24”
(61.0 cm)
Min. 30 1/4” (76.8 cm)
Max. 42” (106.7 cm)
30” - 36” - 42” - 48”
15”
(38.1 cm)
11 3/4”
(29.8 cm)
5 3/4”
(14.6 cm)
12 1/2”
(31.8 cm)
16 1/4” *
(41.3 cm)
Tolerances: ±1/16” (±1.6 mm), -0 unless otherwise stated