Installation Instructions

ENGLISH 11

Tools and parts

Remove the packaging.

CAUTION

Remove the carton carefully. Wear gloves to protect

against sharp edges.

WARNING

Remove the protective lm before putting into operation.

Parts Supplied

• Hardware bag includes:

Part Qty

5 x 45 mm

8 x 40 mm

3.5 x 9.5 mm

Single fan model (4)

4.2 x 8 mm

Single fan model (70)

Double fan model (40)

3.5 x 6.5 mm

Torx adapter

#10 - Single fan model (1)

#20 - Single fan model (1)

#20 - Double fan model (1)

Mounting screws

Mounting template

Parts not supplied

Tools/materials required

• Level

• Drill with ³/₁₆’’ (4.76 mm) drill bit

• Pencil

• Wire stripper or utility knife

• Tape measure or ruler

• Pliers

• Caulking gun and weatherproof caulking compound

• Vent clamps

• Jigsaw

• Metal snips

• Screwdrivers:

- Phillips

- Flat - blade

Parts needed

• Home power supply cable

• ½” (12.7 mm) UL listed or CSA approved strain relief

• 3 UL listed wire connectors

• 1 wall or roof cap

• Metal vent system

Installation Requirements