Installation Guide

ENGLISH 19
Installation
Completing the installation
1. Place the drip tray bracket over the hood back lter
support and place 2 drip tray screws on the slots.
A. Drip trays
B. Drip tray bracket
C. Drip tray screws
Single motor assembly
C
B
A
Double motor assembly
A
B
C
C
2. Grasp the lter handles with both hands and then
place the front edge of the lter into the hood.
3. Push up on the back of the handle, and then set rear
of lter into the drip tray to secure. Repeat for each
lter.
1
2
Model shown for reference only, features may vary
Place the lters and check the operation of the hood.
• To get the most efcient use from your new hood,
read the “Use and Care” manual.
• Keep these Installation Instructions and Use and Care
Guide close to hood for easy reference.