Installation Guide

ENGLISH 11
Parts not supplied
Tools/materials required
• Level
• Drill with 1” (2.5 cm),
1
⁄8” (3.0 mm) and
5
⁄8” (15.8 mm)
drill bits
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Vent clamps
• Jigsaw
• Metal snips
• Screwdrivers:
- Phillips
- Flat - blade
Parts needed
• Home power supply cable
• ½” (12.7 mm) UL listed or CSA approved strain relief
• 3 UL listed wire connectors
• 1 wall or roof cap
• Metal vent system
Dimentions and clearances
A
B
E
G
H
I
F
D
C
30" 36" 48"
A 30" (76 cm) 36″ (91.2 cm) 48" (121.7 cm)
B 25″ (63.2 cm)
C 18″ (45.7 cm)
D 12″ (30.5 cm)
E 2³⁄₄″ (7 cm)
F 29¹⁄₈" (74 cm) 35¹⁄₈″ (89.2 cm) 47¹⁄
16
" (119.6 cm)
G 7¹⁄₂″ (19 cm)
H 2⁹⁄₁₆″ (6.5 cm)
I ³⁄₈″ (1 cm)
Accessories - Sold Separately
DHD30U990CS/DA DHD36U990CS/DA DHD48U990CS/DA DHD30U990CM/DA DHD36U990CM/DA DHD48U990CM/DA
Duct Cover
Kit
DHD-D3020CS/DA DHD-D3620CS/DA DHD-D4820CS/DA DHD-D3020CM/DA DHD-D3620CM/DA DHD-D4820CM/DA
Extension
Kit
DHD-D0000CS/DA DHD-D0000CM/DA
Installation Requirements