Product specifications

Connecting the Wiring (cont.)
(Permanently Connected Appliance Only)
4. If a nonmetallic cable is being used, install a UL
listed strain relief bushing on the back of the
dishwasher.
5. Connect the white wire on the cable to the "N"
terminal on the dishwasher terminal block as
shown below.
6. Connect the black wire on the cable to the "L"
terminal on the terminal block.
.
Connect the ground (green) wire on the cable
using a loop or spade terminal to the ground
connection screw located on the dishwasher
chassis.
Junction
_IK/ To house power
box I_ '1 supply
h _Whiteto r_
white |
(neutral) /
I_ Black to /
I black (line) L.
Gr en
green / _ block X,_ Neutral (N)
(ground) (_) terminal
Ground _ <_/_z--%4_
connection / _ J " Line (L)
screw (chassis) _ terminal
Permanent Wiring Connection
8. Re-install the electrical access panel and the toe
kick brackets.
Installing the Unit in the Cabinet
1. Position the dishwasher in front of the cabinet
opening.
2. Before sliding the unit into the cutout, make sure
the drain hose, water supply line and power cable
are positioned in the utility cutouts as shown
below. Make sure each is routed to the side it will
be connected.
\
Drain hose
1 1/2" dia. 1 1/2" dia.
max. max.
t_ Power Water
cable supply line
WARNING
Exercis e care when installing or removing the
dishwasher to reduce the likelihood of damage to
the floor and the power supply cable.
3. Slowly and gently slide the unit into the
dishwasher opening. As you do this, have
someone gently pull the drain hose, water supply
line and power cable through the access holes
into the adjacent cabinets. Exercise care to make
sure that the wiring and plumbing lines do not
become damaged.
Drain hose
/
Power cable and
water supply line
10 dacar.