Product specifications

4
Preparing for Installation
WARNING
Observe all governing codes and ordinances during
planning and installation. Contact your local building
department for further information.
Preparing the Location
Carefully check the location where the dishwasher is to be
installed. Put it in a location with convenient access. Make
certain that electrical power can be provided in the selected
location.
Plan the installation so that the appliance can be removed
if service is required.
IMPORTANT: Follow all cabinet and countertop minimum
dimensions shown below to insure safe operation.
Prepare the installation location as shown below. All
minimum product dimensions be must met or exceeded
(see page 3). Dimensions shown provide minimum
clearances, unless otherwise noted.
The floor must be solid, level and all cut-out surfaces must
be at right angles. The dishwasher must be secured to the
adjacent cabinets using the anti-tip brackets for safety and
proper operation.
ED or ID30 – 30" Min. (762 mm)
Utilities access hole
34”
(864 mm)
to
36 1/4"
(921 mm)
5"
(127 mm)
8" (203 mm)
Anti-tip anchor into material under
countertop or adjacent cabinets
90˚ 90˚
24" Min.
(610 mm)
Min. countertop 25" (635 mm)
C
L
Power cord
80" (2032 mm)
long
2" (51 mm)
Drain line 48" (1219 mm) long
Water supply hose
54" (1372 mm) long
Back of
dishwasher
CUT-OUT FRONT VIEW CABINET INSTALLATION SIDE VIEW
UTILITY CONNECTIONS