Product specifications

12
Installation Instructions
Toe Kick Installation
Adjusting and Installing the Included Toe
Kick
The the height and depth of the included toe kick are
adjustable.
Adjust the toe kick height. The 1.
typical toe kick height is 4”
high. For other than a typical
installations, remove the rear
assembly screws that hold the two
toe kick sections together. Adjust
the toe kick sections to match
your desired toe kick height and
reinstall the assembly screws.
Snap the toe kick into the toe kick 2.
mounting plate.
Install the entire toe kick assembly by inserting the 3.
depth adjustment pins into the chassis and pushing
straight back on both sides until the front of the toe kick
aligns with the adjacent cabinet toe kick.
Installing a Custom Toe Kick (Model ID30)
See the Custom Panel Installation Template (Dacor PN
100394) for complete installation instructions of a custom
toe kick panel. Use the included stainless steel toe kick as
a mounting surface.
Apply high tack double stick tape to the front of the 1.
stainless steel toe kick.
Attach the custom toe kick to the stainless steel toe 2.
kick. If necessary, screw holes are provided through the
front of the toe kick for material purposes.
Snap the toe kick assembly into the toe kick mounting 3.
plate.
Install the entire toe kick assembly by inserting the 4.
depth adjustment pins into the chassis and pushing
straight back on both sides until the front of the toe kick
aligns with the adjacent cabinet toe kick.
Mounting
plate
Door
Toe kick
Adjustment
pins
Side of
unit