Specifications

17
Use and Care Manual
Operating Your Dishwasher
START
STOP
NORMAL
HEAVY
CRYSTAL
RINSE
DELAY
SANI
RINSE
CANCEL
SECURE
START
STOP
NORMAL
HEAVY
CRYSTAL
RINSE
DELAY
SANI
RINSE
CANCEL
SECURE
START
STOP
NORMAL
HEAVY
CRYSTAL
RINSE
DELAY
SANI
RINSE
CANCEL
SECURE
The Cycle Memory Feature
Your dishwasher remembers the settings for the last cycle it ran.
If you want your dishwasher to run the same cycle as it
ran the previous time:
Press the 1. START/STOP button once.
The START/STOP button light will ash and
the lights on the buttons for the last cycle and
options run will be lit.
Press the 2. START/STOP button again to run
the previous cycle (or you may press a
different cycle and press START/STOP).
Close the door. After a short pause, the dishwasher will 3.
begin to operate.
If the delay feature was used during the previous cycle, your dish-
washer will start after the number of hours originally selected.
Draining Standing Water
To drain standing water from the bottom of your dishwash-
er:
Press 1. NORMAL.
Press 2. START/STOP.
Press 3. CANCEL.
Close the door. After a short pause, you will 4.
hear the water in the dishwasher begin to
drain. Once the water is drained, the dishwasher will stop.
important
Your dishwasher also drains the water in the bottom at the start of each wash
and rinse cycle.
The SECURE Feature
To secure the control panel:
Press and hold the 1. SECURE button for three
seconds. All control panel lights are deactivat-
ed and none of the buttons operate.
To turn off the secure feature, press and hold the 2. SECURE
button for three seconds.
The control panel beeps when you turn this feature on and off.
START
STOP
NORMAL
HEAVY
CRYSTAL
RINSE
DELAY
SANI
RINSE
CANCEL
SECURE
START
STOP
NORMAL
HEAVY
CRYSTAL
RINSE
DELAY
SANI
RINSE
CANCEL
SECURE
START
STOP
NORMAL
HEAVY
CRYSTAL
RINSE
DELAY
SANI
RINSE
CANCEL
SECURE