Product data

Setjjng the Controls (continued)
Setting the Temperature Scale
• The indicator light, next to the C ° button, is lit when the
temperature scale for the freezer and refrigerator displays is
set to Celsius. To change the displays to Celsius (or back to
Fahrenheit), press the C ° button.
Celsius indicator light
Adjusting the Temperature Setting
NOTE: Wait at least 24 hours between adjustments. Re-check the
temperatures before other adjustments are made.
To adjust the temperature setting:
• Press the refrigerator or freezer UP (A) or DOWN (V) key
until the desired temperature is reached.
NOTE: The adjustable temperature range for the freezer is -5°F
to 6°F (-21°C to -14°C). The adjustable temperature range for the
refrigerator is 34°F to 46°F (1°C to 8°C).
Use the table below for guidance if you need to change the
temperature.
CONDITION/ TEMPERATURE
REASON: ADJUSTMENT:
REFRIGERATOR too cold REFRIGERATOR Control 1°
Not set correctly for conditions higher
REFRIGERATOR too warm REFRIGERATOR Control 1° lower
High use or room very warm
FREEZER too cold FREEZER Control 1° higher
Not set correctly for conditions
FREEZER too warm/too little ice. FREEZER Control 1° lower
High use or heavy ice use
Water Filter Monitor
I Do not with water that is unsafe of
use
microbiologicalty
or
unknown quality without adequate disinfection before or after
the system. Systems certified for cyst reduction may be used on
disinfected waters that may contain filterable cysts.
The water filter monitor wilt help you know when it is time to
change your filter. To change the filter, see the Replacing the
Water Filter on page 14.
DISPLAY READING: STATUS:
99 percent Newfilter installed
10 percent Order replacement filter
0 percent or flow decreases Replace filter
A new water filter should display
a reading of 99%. The reading in
the display will decrease as the
filter life is used. When the display
reads 10%, it is time to order
a replacement water filter. It is
recommended that you replace the
filter when the filter display changes
to 0% OR when water flow to
your water dispenser or ice maker
decreases noticeably. See Replacing the Water Filter on page 14.
After replacing the water filter, press RESET and hold for 2
seconds to change the water filter display to 99 percent.
Max Cool
The Max Cool feature assists with periods of heavy ice usage, full
grocery loads or temporarily warm room temperatures.
Press the MAX COOL key to turn on the Max Cool feature.
The Max Cool indicator light will remain on for 24 hours unless
manually turned off.
NOTE: The refrigerator temperature display will remain at 34°F
(1°C) and the freezer temperature display wilt remain at -5°F
(-21°C) while the Max Cool feature is on. After 24 hours, the
refrigerator will automatically return to the previous temperature
settings.
Max cool indicator
light