Specifications

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Clock and Alarms

Alarms

Your sound system has an alarm which can be set to wake you to DAB,

FM radio, CD, USB, SD card, iPod or buzzer alarm. The alarm can be

set to sound once, daily, on weekdays or at weekends. In the event of a

power interruption your sound system has a built in memory chip that will

maintain your alarm settings for when the power is restored.

Note: The alarms can only be set while the unit is in standby mode.

If no buttons are pressed for several seconds, your sound system will

exit the alarm setup.

1. Before setting an alarm ensure that the clock time is set (see

page 49,50).

2. With your sound system in standby mode, press and hold the Intro

/ Repeat button (on remote control) or the Intro / Repeat / Timer

button on the sound system.

3. Press the Tuning Up or Down buttons to choose whether to set the

alarm to On or Off. If Off is selected, the unit will exit the alarm menu.

4. With 'On' selected on the display, press and release the Select button.

The alarm hour digits will ﬂ ash on the display.

5. Press the Tuning Up or Down buttons to choose the alarm hour and

then press and release the Select button to enter the hour setting.

The alarm minute digits will then ﬂ ash on the display.

6. Press the Tuning Up or Down buttons to choose the alarm minute

and then press and release the Select button to enter the minute

setting. The alarm source option will ﬂ ash on the display.

2-6

3-6

4-6